CIBIE |
![]() |
|
|
|
·
Guiding Le Mans
Winners to victory since 1975, competition proven performance.
·
Reliability,
Security, Performance, three reasons for being 100% CIBIE.
·
CIBIE maximum
strength lighting has made its mark in competitions across the world.
·
With CIBIE, to see
better is to drive better.
Beam
Type code:
AB - Fog Beam:
Range from 50 to 70 meters. Clear
Horizontal cut to avoid self-dazzling. Very
wide lighting providing a good view of the verge and in the bends. It must be placed as low as possible to obtain maximum
effectiveness.
LP - Drive
Beam: Range from 250 to 400 meters.
Long range and cornering beam. Long
visibility distance in front and on the sides.
LPR - Radar -
Drive type Beam: Range of 370
meters. Anti-dazzle system of the
headlamp eliminates rising rays. It
allows a good view of the road even in very foggy weather.
In clear weather, it resembles drive beam.
VA - Cornering
Beam: Range of 140 meters.
Intermediate lighting, between fog and drive beams.
Very homogeneous lighting on a range of more than 40°.
A very suitable beam for sport driving on winding roads.
SP - Spot-Long
Range Beam: Range from 500 to 600
meters. Long, deep narrow beam.
Maximum luminosity concentrated in front of the car.
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel. - Black “leather” finish (epoxy power coating) or - Chrome finish by electro plated chrome process for
high resistance to road salt. Front
face water- tight by use of sunken Butyl gasket. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2 |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP |
|
Incld.
covers |
Yes, but can be special ordered with out |
|
Incld.
Bulb |
Yes |
|
Mounting |
Fixing pivot 105° turn / 10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell / reflector / rim in heat resistance polyamide
corrosion resistant to naval standards. Gray color. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2, 12V |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP |
|
Incld.
covers |
Yes, but can be special ordered with out |
|
Incld.
Bulb |
Yes |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel. - Black “leather” finish (epoxy power coating) or - Chrome finish by electro plated chrome process for
high resistance to road salt. Front
face water- tight by use of sunken Butyl gasket. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2, use
with 100W bulb possible |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear, In yellow versions, either the lens
maybe yellow or the H2 bulb is covered by yellow shroud (in this case,
with a clear lens) |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP, SP |
|
Incld.
covers |
Yes, but can be special ordered with out |
|
Incld.
Bulb |
Yes, but can be special ordered with out |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Polyamide shell treated steel rim - Black |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2 |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
No |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel. - Black “leather” finish (epoxy power coating) or - Chrome finish by electro plated chrome process for
high resistance to road salt. Front
face water- tight by use of sunken Butyl gasket. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2, Use of 100W bulb possible |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
No |
|
Mounting |
1M14 x 200 bolt |
|
Composition |
Glass filled polypropylene shell ABS rim. - Black or - Chrome |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2, Use of 100W bulb possible |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear, In yellow versions, either the lens
maybe yellow or the H2 bulb is covered by yellow shroud (in this case,
with a clear lens) |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LPR |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
No |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel. - Black “leather” finish (epoxy power coating) or - Chrome finish by electro plated chrome process for
high resistance to road salt. Front
face water- tight by use of sunken Butyl gasket. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot (105° turn) |
|
Bulb |
H2 |
|
Isolated
Earth |
yes |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
Yes |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel. - Black “leather” finish (epoxy power coating) or - Chrome finish by electro plated chrome process for
high resistance to road salt. Front
face water- tight by use of sunken Butyl gasket. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Three way fixing pivot |
|
Bulb |
H1 |
|
Isolated
Earth |
yes, through mounting bolt |
|
Lens |
Concave soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear For yellow lighting, a yellow shroud
around an H1 bulb is used. |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP, SP |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
No |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell in high thermal absorption steel. - Black “leather” finish (epoxy power coating) |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Three way fixing pivot |
|
Bulb |
H4 |
|
Isolated
Earth |
yes, through mounting bolt |
|
Lens |
Concave soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
No |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel
in black
satin., chrome rim |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Three way fixing pivot |
|
Bulb |
H1, Use of 100W bulb possible |
|
Isolated
Earth |
yes, through mounting bolt |
|
Lens |
Annealed soda lime glass for high resistance to
thermal shocks |
|
Lens
color |
Yellow or clear For yellow lighting, a yellow shroud
around an H1 bulb is used. |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP, SP |
|
Incld.
covers |
Yes |
|
Incld.
Bulb |
No |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell in carbon fiber reinforced polyamid high
resistance to vibration, designed to withstand the worst possible
conditions, corrosion
resistance to naval standards. |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Two way fixing pivot |
|
Bulb |
H2, Use of 100W bulb possible |
|
Isolated
Earth |
yes, through mounting bolt |
|
Lens |
Soda lime glass for high resistance to thermal
shocks |
|
Lens
color |
Yellow or clear, except spot/long range only
available in clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
AB, LP, SP, VA |
|
Incld.
covers |
No |
|
Incld.
Bulb |
No |
|
Mounting |
1M10 x 150 bolt (can be fitted with anti theft nut). |
|
Composition |
Shell constructed of high thermal absorption steel. “Black leather” finish (epoxy powder coating) |
|
Pendant/Upright
mounting |
Yes - can be mounted above or below the bumper |
|
Adjustment |
Three way fixing pivot (except the snap-in version) |
|
Bulb |
H1, Use of 100W bulb possible |
|
Isolated
Earth |
yes |
|
Lens |
Flat, non-scored |
|
Lens
color |
Clear |
|
Reflector |
Silicon coated, vacuum aluminized |
|
Beam
type |
VA, LP (620m) |
|
Incld.
covers |
Yes, but can be order with out |
|
Incld.
Bulb |
No |
|
Main
Beam/Dipped Bulbs |
Wattage |
Voltage |
Color |
Std. Shell Size. |
H4 |
60/55 |
12 |
Yellow |
P43T |
|
60/55 |
12 |
Clear |
P43T |
|
75/70 |
24 |
Yellow |
P43T |
|
75/70 |
24 |
Clear |
P43T |
|
|
|
|
|
Europe
Halogen side light |
45/40 |
12 |
Clear |
P45T |
|
|
|
|
|
|
|
|
|
|
H1 |
55 |
12 |
Clear |
P14,
5s |
|
70 |
24 |
Clear |
P14,
5s |
|
|
|
|
|
H2 |
55 |
12 |
Clear |
X511 |
|
70 |
24 |
Clear |
|
|
|
|
|
|
H3 |
55 |
12 |
Clear |
PK22s |
|
70 |
224 |
Clear |
|
|
|
|
|
|
Copyright 1997 / 2003 © Toysport Limited. All rights reserved. Republication or redistribution of Toysport website content, including by framing or similar means, is expressly prohibited without the prior written consent of Toysport. Toysport shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.