| SABELT |
 |
TRW SABELT
TRW
Sabelt is the number one manufacturer of competition harnesses in the world.
Nearly every Formula One, IndyCar, and Sports Car team has used these harnesses
exclusively for years. Belts are 3" wide with camlock releases, and are
available in bolt-in, snap-in or wrap-around mountings. Mounting hardware kits
must be purchased separately.
COMPETITION
HARNESS
- 48" Individual shoulder harness $49.00 pr.
- 75" "H" type shoulder harness $59.00
- Pull-down style lap belt (preferred by most drivers) $109.00
- Pull-up style lap belt $109.00
- Single anti-submarine belt $12.00
- Dual anti-submarine belt $23.00
- Available in red only.
HARNESS PAD
- Sabelt
individual harness pad allows belts to be properly tightened while
maintaining a comfortable fit.
- Harness Pads $25.00/pr.
- Available
in black, red and blue.
MOUNTING KIT
- Bolt-In Mounting Kit $6.00
(Includes 1 bolt, 1 nut, 1 flat washer, 1
lock washer, 1 bolt-in style belt end) One kit required for EACH BELT END to
be mounted.
- Snap-In Mounting Kit $8.00
(Includes 1 eye-bolt, 1 washer, 1 nut, 1 snap-in style
belt end) One kit required for EACH BELT END to be mounted.
- WARNING: Shoulder harnesses should be fitted as close to
horizontal as possible. The connection points should always be reinforced by
a steel plate fitted on the back of the contact point, not by direct welding
or pop riveting. After any accident or heavy crash, harnesses must be
inspected and replaced. The
mounting points musts be inspected and re-checked. Belts showing wear or
cuts should be replaced immediately.
Back to Product
Line
Copyright 1997 / 2003 © Toysport
Limited. All rights reserved. Republication or redistribution of Toysport website
content, including by framing or similar means, is expressly prohibited without
the prior written consent of Toysport. Toysport shall not be liable for any
errors or delays in the content, or for any actions taken in reliance thereon.